Operation Manual

- 32 -
14. Custom Function----Sleep Function
● This product is equipped with
Sleep Function to avoid battery
drain when the ash unit is idle.
● Press <
> button and hold for 2
seconds to enter the sleep
Function Mode. The LCD panel
displays “SL” (Sleep) and
“Sleeping Time”. Idle time before
entering Sleep Mode is 10 minutes
by default. Rotate Select Dial
< > to set a desired time for the
ash or to turn off Sleep Function.
Press < > button to return.
Idle Time Meaning
OF
Sleep Function is turned off. The ash unit will not
automatically enter sleep mode.
3 Idle time before entering Sleep Mode is set to 3 minutes.
10 Idle time before entering Sleep Mode is set to 10 minutes.
30 Idle time before entering Sleep Mode is set to 30 minutes.
60 Idle time before entering Sleep Mode is set to 60 minutes.
● When the ash enters sleep mode, the LCD panel displays a
“Z
z
” icon.
● To wake up the ash unit, press any button on the ash unit, or
press the camera release button, or press the trigger TEST
button.
Note:
The idle time before entering Sleep Mode is recommended to set
short. This can ensure a longer battery life.