Operation Manual

- 34 -
1. Over-Temperature Protection
● To avoid overheating and deteriorating the ash head, do not re
more than 30 continuous ashes in fast succession at 1/1 full
power. After 30 continuous ashes, allow a rest time of at least 10
minutes.
● If you re more than 30 continuous ashes and then re more
ashes in short intervals, the inner over-temperature protection
function may be activated and make the recycling time about 10
to 15 seconds. If this occurs, allow a rest time of about 10
minutes, and the ash unit will then return to normal.
● When the over-temperature protection is started,
is shown on
the LCD display.
Number of ashes that will activate over-temperature
protection:
Power Output Level Number of Flashes
1/1 30
1/2 +0.7 40
1/2 +0.3 50
1/2 60
1/4
（
+0.3,+0.7
）
100
1/8
（
+0.3,+0.7
）
200
1/16
（
+0.3,+0.7
）
300
1/32
（
+0.3,+0.7
）
500
1/64
（
+0.3,+0.7
）
1000
1/128
（
+0.3,+0.7
）
Number of ashes that will activate over-temperature
protection in high-speed sync mode:
Power Output Level Number of Flashes
1/1 15
1/2
（
+0.3,+0.7
）
20
1/4
（
+0.3,+0.7
）
30
1/8
（
+0.3,+0.7
）
1/16
（
+0.3,+0.7
）
40
1/32
（
+0.3,+0.7
）
1/64
（
+0.3,+0.7
）
50
1/128
（
+0.3,+0.7
）
Protection Function