Operation Manual

- 36 -

● Creating a Catchlight

With the catchlight panel, you can create a catchlight in the

subject’s eyes to add life to the facial expression.

Point the ash head upward

by 90°.

Pull out the wide panel.

The catchlight panel will

come out at the same time.

Push the wide panel back in.

● Push in only the wide panel.

● Follow the same procedures

as for bounce ash.

● Using the Wide Panel

Pull out the built-in wide panel to enlarge the ash lighting range,

so as to get more softened and natural lighting effect.

Pull out the wide panel and place

it over the ash head as shown.

The ash coverage will then be

extended to 14 mm.

● The catchlight panel will come

out at the same time. Push

the catchlight panel back in.

● Point the ash head straight ahead and then upward by 90°.

The catchlight will not appear if you swing the ash head left

or right.

● For best catchlight effect, stay 1.5m/4.9ft away from the

subject.