TTL 锂电机顶闪光灯 Pioneering TTL Li-ion Camera Flash For Sony INSTRUCTION MANUAL 说 明 手 册 中英文双语 / Chinese English Bilingual 深圳市神牛摄影器材有限公司 GODOX Photo Equipment Co., Ltd. 地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋 Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong Town, Baoan District, Shenzhen 518103, China 在使用本产品之前： 电话/Tel: +86-755-29609320(8062) 请先仔细阅读本手册，以确保您能安全使用。请保存好本手册以备将 传真/Fax: +86-755-25723423 邮箱/E-mail: godox@godox.com 来查询参考。 http://www.godox.
Foreword Thank you for purchasing this product. Always keep this product dry. Do not use in rain or in damp conditions. This V860IIS camera flash applies to Sony DSLR series cameras This product contains high-voltage electronic parts. Touching the high-voltage circuit inside it may result in electric shock. Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center. and is compatible with TTL autoflash.
Contents 27 Foreword 28 For Your Safety 31 Name of Parts Body Control Panel LCD Panel What's in the Box of V860IIS Kit? What's in the Box of V860IIS (only flash unit)? Separately Sold Accessories 34 Battery 35 Attaching to a Camera 35 Power Management 36 Flash Mode: TTL Autoflash FEC (Flash Exposure Compensation) High-Speed Sync Second-Curtain Sync 37 M: Manual Flash 38 Multi: Stroboscopic Flash 39 Wireless Flash Shooting: Optical Transmission Wireless Settings Setting Master Unit’s Flash
● LCD Panel Name of Parts (1) TTL Autoflash Zoom : zoom display (Page 48) Focus length (Page 48) : High-speed sync : Automatic (Page 37) : Manual(Page 37) TTL : TTL autoflash 09 01 02 03 11 Distance indicator display 10 : Flash exposure 04 06 05 12 13 07 compensation (Page 36) Flash exposure compensation amount ● The display will only show the settings currently applied.
(4) Optical Transmission Shooting ● Separately Sold Accessories ● Master Unit The product can be used in combination with the following accessories sold separately, so as to achieve best photography effects: : Radio transmission Flash mode X1T-S wireless flash trigger, FT-16S power & trigger control, Mini Gr : Group flash (radio transmission) wireless shooting softbox, White & Silver reflector, Honeycomb, Color gels, Snoot, etc.
3 To unload the battery, tap the white knob and the battery pack will pop out. Then close the compartment. C.Fn Disabling Auto Power Off function is recommended when the flash is used off camera. (C.Fn-APO, Page 49) C.Fn Slave Auto Power Off Timer is set to 60 minutes by default. Another option “30 minutes” is available. (C.FnSv APOT, Page 49) ● Battery Level Indication Make sure the battery pack is securely loaded in the flash.
High-Speed Sync Optical S1 Secondary Unit Setting High Speed Sync (FP flash) enables the flash to synchronize with all camera shutter speeds. This is convenient when you want to use aperture priority for fill-flash portraits. As high-speed sync setting is determined by Sony camera’s shutter, please refer to your camera’s manual. In M manual flash mode, press button so that this flash can function as an optic S1 secondary flash with optic sensor.
To avoid overheating and deteriorating the flash head, do not use stroboscopic flash more than 10 times in succession. After 10 times, allow the camera flash to rest for at least 15 minutes. If you try to use the stroboscopic flash more than 10 times in succession, the firing might stop automatically to protect the flash head. If this happens, allow at least 15 minutes’ rest for the camera flash. Slave/Master Unit’s Positioning and Operation Range 15m(49.
Exit Optical Wireless Lighting Mode Flash Mode Fill -flash SLOW REAR 1 2 WL Set the camera to NON wireless lighting mode. Press < > Wireless Selection Button to switch to other modes. 2. Setting Master Unit's Flash Mode 1 Press Function Button 4 < Gr > to choose the group from M/A/B/C. Then, press Function Button 3 < MODE > so that the master unit can work in OFF / TTL flash mode. Choose one of them as the flash mode of master unit..
2 Press the button to confirm. ● If the slave unit’s auto power off function is workable, press the master unit’s test button to power it on. Please note that test firing is unavailable during the camera’s regular metering time. ● The effective time of slave auto power off is changeable. (C.Fn-Sv APOT/ Page 49) 4. TTL: Fully Automatic Wireless Flash Shooting Autoflash Shooting with One Slave Unit 1 2 3 Master Unit Setting not blink after the slave unit’s flash ready indicator is lightened. (C.
Using a flash (master/slave) with a radio transmission wireless shooting function make it easy to shoot with advanced wireless multiple flash lighting, in the same way as TTL autoflash shooting. The basic relative position and operation range are as shown in the picture. You can then perform wireless TTL autoflash shooting just by setting the master unit to .
Bounce Flash By pointing the flash head toward a wall or ceiling, the flash will bounce off the surface before illuminating the subject. This can soften shadows behind the subject for a more natural-looking shot. This is called bounce flash. To set the bounce direction, hold the flash head and turn it to a satisfying angle. -7-90 360 ZOOM: Setting the Flash Coverage and Using the Wide Panel The flash coverage can be set automatically or manually.
C.Fn: Setting Custom Functions The following table lists the available and unavailable custom functions of this flash. C.Fn Custom Functions Custom Function Function Signs Setting No. Settings & Description m/ft m m ft feet ON ON OFF OFF ON ON OFF OFF Slave auto power 60min 60min off timer 30min 30min Beeper ON ON OFF OFF 12sec Off in 12 sec.
Technical Data Model V860IIS • Type Troubleshooting If there is a problem, refer to this Troubleshooting Guide. The Camera Flash cannot be charged. Compatible Cameras Sony DSLR cameras (TTL autoflash) Guide No. 60 (m ISO 100) (1/1 output @ 200mm) 190 (feet ISO 100) Flash Coverage 20 to 200mm • Auto zoom (Flash coverage set automatically ● The battery is installed in the wrong direction. →Install the battery in the correct direction. ● The camera flash’s internal battery is exhausted.
Firmware Upgrade This flash supports firmware upgrade through the USB port. Update information will be released on our official website. USB connection line is not included in this product. The USB port is a standard Micro USB socket. Common USB connection line is applicable. Compatible Camera Models This flash unit can be used on the following Sony DSLR camera models: α77II α7RII α7R α58 α99 ILCE6000L ● This table only lists the tested camera models, not all Sony DSLR cameras.
