User's Manual

故障排除
如不能接收到音频信号,请检查电池是否正确安装以及是否打开发射器
电源;发射器和接收器是否设置在同一组别和频道;麦克风及耳机是
否已正确牢固连接到位;功能模式是否设置正确。
检查发射器是否设置的静音。
如您的发射器受到他人干扰,改变发射器和接收器的频道设置即可。
如您发现发射音频距离有限或者有漏发现象 请检查是否电池耗尽
请尝试更换电池。
维护保养
避免跌落:如果受到强烈碰撞或振动, 发射器和接收器可能会发生故障。
保持干燥:本产品是非防水产品,如果将其浸入水中或放置于高湿度的
环境中将可能发生故障。 内部构造生锈可能会导致无法修理的损害。
避免温度骤变:温度的突变,诸如在寒冷天进出温暖的大楼将可能会使
发射器和接收器内部结露 为避免结露 请将发射器和接收器事先装入
手提袋或塑料包内, 以防温度突变。
远离强磁场:无线电广播发射机等设备产生的强静电或强磁场可能会干
扰本产品正常工作。
1 年保修, 消耗品如领夹麦克风等, 不在 1 年保修范围。
经发现擅自检修此设备, 将取消一年保修期, 维修需要收取相关费用。
如果本品出现故障或者被水淋湿, 在专业人员维修后方可继续使用。
如有技术更改, 恕不另行通知。
Thank you for purchasing UHF Wireless Microphone System ——
WMicS1. These products are suitable for video recording, journalistic
shooting, audio recording, etc. Please read this manual carefully
before using to make sure the correct operation and exert the optimum
function.
Forward
UHF Frequency Range: 514MHz-596MHz. There are 96 wireless
channels which can be freely switched without interference
High and stable sound quality like broadcast
The maximum wireless distance up to 100m
With OLED display to show the parameters setting
Achieve real-time monitoring with 3.5mm earphone
With output volume control and silence function
The power of transmitter is adjustable
Support two transmitters and one receiver to work simultaneously
Two power supply mode
Features:
- 09 - - 10 -