User Manual

ManualsBrandsGodox ManualsLighting & StudioTTL Wireless Flash Trigger Set for Nikon

TTL

无线引闪器

TTL Wireless Flash Trigger

For Nikon

说明手册

Instruction Manual

中英文双语

Chinese English Bilingual

705-X1N000-00

Made In China

地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋

Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong

Town, Baoan District, Shenzhen 518103, China

电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423

邮箱/E-mail: godox@godox.com

神牛摄影器材有限公司

GODOX Photo Equipment Co., Ltd

Compatible Camera Models

Nikon Single-lens Reflex Digital Cameras:

D4S, Df, D4, D810A, D750, D810, D610, D600, D800/D800E, D700,

D300S, D300, D7200, D7100, D7000, D5500, D5300, D5200, D5100, D5000,

D3300, D3200, D3100, D3000, D90, D200, D100, D80

Summary of content (14 pages)

PAGE 1
Compatible Camera Models Nikon Single-lens Reflex Digital Cameras: D4S, Df, D4, D810A, D750, D810, D610, D600, D800/D800E, D700, D300S, D300, D7200, D7100, D7000, D5500, D5300, D5200, D5100, D5000, D3300, D3200, D3100, D3000, D90, D200, D100, D80 TTL 无线引闪器 TTL Wireless Flash Trigger For Nikon 神牛摄影器材有限公司 GODOX Photo Equipment Co.
PAGE 2
Contents 规格参数无线闪光无线功能兼容Nikon CLS创意闪光系统(Creative Lighting System) 可控从属单元组最多6组(M/A/B/C/D/E) 传输范围(约) >100米频道 32个 25 Foreword 25 Warning 27 Names of Parts Power Switch of AF Assist Beam Body Channel Settings LCD Panel Mode Settings Accessories Current Group Settings Battery Multi Flash Group ON/OFF Settings 其他 33 Setting the Transmitter Power Switch 时延设置有(0~10ms，以100us为单位设置) 无线快门接收器端可以通过2.
PAGE 3
Foreword Warning Thanks for your purchase of this X1N TTL wireless flash trigger. Do not disassemble. Should repairs become necessary, this product must be This TTL wireless flash trigger can be used with a transmitter and one or more receivers for studio sent to an authorized maintenance center. flash, speedlight, and camera shutter. Featuring multi-channel triggering, stable signal transmission, Always keep this product dry. Do not use in rain or in damp conditions.
PAGE 4
Names of Parts Names of Parts Body Receiver TEST Trigger Button Transmitter TEST Trigger Button --Half Press --Fully Press Battery Compartment AF Assist Beam Switch Battery Compartment --ON(AF Assist Beam outputs) --OFF(AF Assist Beam do not output) Micro USB Port Power Switch --ON (Power On) --OFF (Power Off) PC Sync Socket Hot Shoe Speedlight Connection Status Indicator Lamp Power Switch Micro USB Port --ON (Power On) --OFF (Power Off) 2.
PAGE 5
Names of Parts Names of Parts Accessories Transmitter Panel CH 1.Remote Cable(N1, N3) E Gr D C B A 2.Sync Cable 3.
PAGE 6
Using the Flash Trigger Using the Flash Trigger The flash trigger features the following functions: 1. As a Wireless Studio Flash Trigger 1.1 Mount the transmitter on camera hotshoe and turn it on before turning on the camera. 1.2 Connect the receiver to studio flash by Sync Cable (one end in 2.5mm Shutter Release Port of the receiver, the other end in sync port of studio flash) before turning on the studio flash. 1.3 Set the transmitter and the receiver to the same channel. 1.
PAGE 7
Setting the Transmitter Setting the Transmitter Power Switch Current Group Settings Slide the Power Switch to ON, and the device is on and Status Indicator Lamp will not blink. 1. Short press the Button to set the current Note: In order to avoid power consumption, turn off the transmitter when not in use. group. CH 2. The current group settings will blink and turn Power Switch of AF Assist Beam the Select Dial to change the settings.
PAGE 8
Setting the Transmitter Setting the Transmitter Group Settings Multi Flash Group ON/OFF Settings 1. Long press the Button to set all effective groups simultaneously. 1. Open the multi flash in the C.Fn Custom Functions (set C.Fn-04 as on). CH 2. Short press button to change the mode of selected group. 3. The current group’s mode will be changed simultaneously by the order of on/-- (-- represents OFF, which means that the current group will not fire flashes in this mode).
PAGE 9
Setting the Transmitter Setting the Transmitter Modeling Lamp Control Custom Double-click the Button to power ON/OFF the modeling lamp. Functions Setting Signs Automatically Enter Power Saving Mode 1. The flash trigger will go into standby mode after the transmitter enter sleep mode, and the C.Fn-02 Zoom setting AU 2. Press any of the button ( fully pressed///) can wake up the can also wake up the system. 3.
PAGE 10
Setting the Transmitter Setting the Transmitter Custom Functions Setting Signs Settings and Description Application C.Fn-09 Send the setting value -on C.Fn-10 Wireless Shutter Release Mode Half press the Trigger Button to focus. Fully press the Trigger Button, and the Functions No. APP mode -on Status Indicator Lamp turns red. Now camera is ready to shoot. When releasing the button, the After the setting value were changed, it will send the setting value.
PAGE 11
Setting the Receiver Selecting the Operation Method 4. The channel amount will increase from 1 to 32. When the current channel is 32, press the Transmitter: Button again and the channel 1 will be displayed on the panel. X1N Operation Method 1(by default） TTL/M Mode Group Settings Button 1. Short press the Button and the group amount will increase a step each time.
PAGE 12
Selecting the Operation Method Selecting the Operation Method Multi Mode (C.Fn-04-on) Button X1N Operation Method 2 Operation Function Short press (under normal status) Enter CH settings; (under settings) Confirm and back TTL/M Mode Button to normal status CH/OK Double-click Control the ON/OFF of modeling flash Long press for Enter C.
PAGE 13
Selecting the Operation Method Selecting the Operation Method [Note 2] 3 or 5 Groups refers to wireless groups. If there is a camera flash attached on the transmitter, Multi Mode (C.Fn-04-on) Button CH/OK the camera flash belongs to M group instead of 3 or 5 groups. Choose 3 or 5 groups by Operation Function Short press (under normal status) Enter CH settings; (under settings) Confirm and back to setting C.Fn-07 to 03 or 05.
PAGE 14
Caring for Flash Trigger Avoid sudden drops. The device may fail to work after strong shocks, impacts, or excess stress. Keep dry. The product isn't water-proof. Malfunction, rust, and corrosion may occur and go beyond repair if soaked in water or exposed to high humidity. Avoid sudden temperature changes. Condensation happens if sudden temperature changes such as the circumstance when taking the transceiver out of a building with higher temperature to outside in winter.