User Manual

- 45 - - 46 -

Technical Data

X1T-F

Yes (0~10ms，use 100us as the unit)

ON/OFF

Adjust the flash's focal length through the transmitter

Transmitter: use a PC cord to input and output

Use the Micro USB port to upgrade

Settings will be stored for 2 seconds after last operation

and recover after a restart

72x75x52(mm)/90g

Model

Others

Synchronization delay set

Beep

Modeling flash

ZOOM setting

Output interface

Firmware upgrade

Memory function

Dimension/Weight for Transmitter

Compatible Camera Models

A X-Pro2, X-T20, X-T2, X-T1, GFX 50S

B X-Pro1, X-T10, X-E1, X-A3

C X100F,X100T

FUJIFILM cameras are divided into three kinds according to their

different controlling ways to camera flash:

This table only lists the tested camera models, not all FUJIFILM cameras. For the

compatibility of other camera models, a self-test is recommended.

Rights to modify this table are retained.

Note : Please refer to C.Fn-11 in Setting Custom Functions.

Model X1T-F

Function TTL/M Flash Stroboscopic

Flash AF-assist Beam

Standard REAR HSS(FP) Standard

A √ √ √ √ √

B √ -- -- √ --

C √ √ Note √ --

Compatible camera models & functions support:

Note:

1.X100T do not have second curtain sync (REAR)function.

2.The AF assist beam will light up when the shutter is at low speed(<200).