Operation Manual

- 33 - - 34 -
Setting the Transmitter
Functions
Zoom setting
Multi Flash
ON/OFF
Number of groups
Beep
Custom
Functions No.
Settings and Description
Changing with camera's Zoom value. Flashes' auto
zoom functions should be turned on.
Zoom（20/24/28/35/50/70/80/105/135/200 mm)
PC sync socket connects with camera
PC sync socket connects with flash
Multi flash OFF
Multi flash ON
The minimum power output in M/Multi mode is 1/128
The minimum power output in M/Multi mode is 1/256
A/B/C
A/B/C/D/E
ON
OFF
Setting Signs
AU
20,24,28,35,50,70,
80,105,135,200
in
ou
--
on
1/128
1/256
03
05
--
on
PC sync socket
connects with camera
/camera flash
Minimum power
output in M/Multi
mode
C.Fn-02
C.Fn-03
C.Fn-04
C.Fn-05
C.Fn-06
C.Fn-07
1. Press the <CH/OK> Button for 2 seconds or longer until <Fn> is displayed.
2. Select the custom function No.
* Turn the Select Dial to choose the Custom Function No.
3. Change the Setting.
* Press the <GR> Button until the custom function No. blinks.
* Turn the Select Dial to set the desired number. Pressing <GR> button will confirm
the settings.
* Press <MODE> button to exit the C.Fn settings.
Setting the Transmitter
Setting the Camera
To trigger X1T-S, please set camera's flash mode to fill flash, auto flash, slow flash or
rear curtain flash.
X1T-S cannot be triggered when the camera is set to wireless lighting mode (WL).
Flash Mode
SLOW
REAR
WL
Fill-flashFill-flashFill-flash
Flash Mode
SLOW
REAR
WL
WirelessWirelessWireless