User's Manual

7.5 Full match and back to APP main interface.
7.6 When started the Bluetooth function, the
Bluetooth icon will be displayed on the
transmitter’s panel.
7.7 Set the channels of the slave flash and the
transmitter to the same, and parameters e.g.
slave flash mode, power value, modeling lamp
and beep can be controlled on the APP of the
smartphone.
7.8 Use the APP of the smartphone for shooting
after setting all the parameters.
Note: When successfully connected the flash trigger and
smartphone APP, the auto sleep of the flash trigger can be
set to 30 min.
Using the Flash Trigger
iPhone 6S iPhone 6S Plus iPhone 7 Plus iPhone 7 iPhone 8 Plus
iPhone 8 iPhone 6 Plus iPhone 6 iPhone X
HUAWEI P9 HUAWEI P10 HUAWEI P10 Plus HUAWEI Mate 9 Pro
HUAWEI Mate 9 HUAWEI Mate 10 Pro HUAWEI Mate 10
HUAWEI P20 HUAWEI P20 Pro
Samsung galaxy S8 Samsung galaxy Note8 Samsung galaxy S9
1. This table only lists the tested Smartphone models, not all Smartphone. For the compatibility
of other Smartphone models, a self-test is recommended.
2. Rights to modify this table are retained.
This flash trigger can be used on the following Smartphone models:
Compatible Smartphone Models
- 44 -
- 43 -