User Guide

5
Hardware Installation
Important: If the source DP output doesn't
support DP 1.2/1.4, the Multi Stream Transport
function will be disabled and this hub becomes
a Splitter, mirroring your video source across all
displays.
1. Power off all devices you plan to connect to
the unit.
2. Connect the unit to your PC's DisplayPort
connector.
3. Connect your HDMI monitors to the unit's
HDMI Outputs with HDMI cables (not
included).
4. Connect the unit's Power Jack to a USB 3.0
port or 5V/1A to 5V/2A wall charger for
power with the included Micro-USB power
cable. Note: This connection is required to
power the adapter.
5. Power on all of the connected devices.
6. The MST hub is ready for use.