2x2 HDMI Video Wall Processor User's Guide P/N:Videowall G4-0136A
Thank you for purchasing from gofanco. Our products aim to meet all your connectivity needs wherever you go. For optimum performance and safety, please read the instructions carefully and keep this User's Guide for future reference. If you need more information about our products, please visit www.gofanco.com. For technical support, email us at support@gofanco.com. For drivers or manual download, please go to www.gofanco.com/downloads.
Introduction gofanco's 2x2 HDMI Video Wall Processor is equipped with 1 HDMI input and 4 HDMI outputs. It supports 9 video wall modes, and capable of cascading up to a 4x4 video wall. Features • • • • • • • 2x2 HDMI Video Wall controller/processor, with cascading up to a 4x4 video wall Input resolutions: Up to 4K@60Hz YUV 4:4:4 (4K HDR is not supported) Output resolution: 4 HDMI outputs fixed at 1080p @60Hz. Automatic up and down scaling to 1080p output HDCP 2.2/1.
Product Layout Figure 1: Front Panel Layout 1. 2. 3. 4. Power LED: On when powered on IR eye: Receives IR signal from the remote control Audio: Press to turn On/Off the audio output Mode: Press to toggle between the 9 video wall modes. See Video Wall Modes on page 5 for more information Figure 2: Rear Panel Layout 1. 2. 3.
Hardware Installation 1. 2. 3. 4. 5. Power off all devices including your HDMI source and HDMI display(s). Connect your HDMI source to the Video Wall Processor's HDMI Input using an HDMI cable (HDMI cable not included). Connect your HDMI display(s) to the HDMI Output(s) of the Video Wall Processor using HDMI cable(s) (HDMI cables not included). Plug the included power adapter into the Video Wall Processor's Power Jack, then plug the power adapter into a reliable power outlet.
IR Remote Users can control the Video Wall Processor using the included remote. Point the remote control at the Video Wall Processor's IR eye. 1. 2. 3. 4. 5. Standby Button: Press to turn On/Off standby mode Mute Button: Press to mute and unmute the sound OSD Button: Press to show/ hide OSD.
Connection Diagram The application diagram shows the most typical input and output devices used with the 2x2 HDMI Video Wall Processor. Single Video Wall Processor Figure 5: Single Video Wall Processor Cascade Video Wall Processor Supports cascading up to 4 Video Wall Processors.
Specifications 8
Blank Page 9
Blank Page 10
Disclaimer The product name and brand name may be registered trademarks of related manufacturers. TM and ® may be omitted on the user's guide. The pictures on the user's guide are just for reference, and there may be some slight differences with the actual products. We reserve the right to make changes without prior notice to a product or system described herein to improve reliability, function, or design.
Thank you for choosing gofanco www.gofanco.
