User Guide

5
Hardware Installation
1. Power off all devices including your HDMI source
and HDMI display(s).
2. Connect your HDMI source to the Video Wall
Processor's HDMI Input using an HDMI cable
(HDMI cable not included).
3. Connect your HDMI display(s) to the HDMI
Output(s) of the Video Wall Processor using HDMI
cable(s) (HDMI cables not included).
4. Plug the included power adapter into the Video
Wall Processor's Power Jack, then plug the power
adapter into a reliable power outlet.
5. Power on all connected devices. The 2x2 HDMI
Video Wall Processor is ready for use.
Video Wall Modes
Press the Mode button on the Processor's front panel or
the IR Remote control to toggle through the 9 video wall
modes.
Figure 3 : Video Wall Modes