User Guide

6
IR Remote
Users can control the Video Wall Processor using the
included remote. Point the remote control at the Video
Wall Processor's IR eye.
Figure 4: IR Remote Layout
1. Standby Button: Press to turn
On/Off standby mode
2. Mute Button: Press to mute
and unmute the sound
3. OSD Button: Press to show/
hide OSD. Displays video
wall mode and audio
properties
4. Video Wall Mode Selection
Button (x4): Press to select
the next/previous video wall
mode
5. Pre-set Video Wall Mode
Selection Button (x5): Press
to select between 5 video wall
modes. Note: The 2x2 button
toggles between 2x2 and
2x2_Rotation mode