User Guide

IR Control

Provides IR control of the connected devices. The IR

feature is bi-directional so either the source device or the

display device(s) can be remotely controlled.

Controlling the Source Device

1. Connect an IR Emitter Cable to the IR Out port of the

Transmitter.

2. Point the IR Emitter Cable's IR eye in line with the

source device's IR window.

3. Connect an IR Receiver Cable to the IR In port on

each CAT6/7 Receiver.

Controlling the Display Device(s) using IR In

Allows you to remotely control each display individually.

1. Connect an IR Receiver Cable to the IR In port of the

Transmitter.

2. Connect an IR Emitter Cable to the IR Out port on

each CAT6/7 Receiver.

3. Point the IR Emitter Cable's IR eye in line with the

display's IR window.

Note: The Transmitter's IR Out connector will output the

IR signals received from any of the CAT 6/7 Receivers,

so as to allow control of a source from any of the remote

CAT 6/7 Receivers.

IR Pin Definition