User Guide

5
Product Layout
Figure 1: Transmitter Layout
1. Reset Button: Press to restart the Transmitter
2. CAT6/7 Out (x2): Connects to the CAT6/7 In of the
Receivers using CAT6/7 cables (CAT cables not
included)
3. HDMI Out: Connects to your HDMI display
4. HDMI In: Connects to your HDMI source device
5. Power Jack: Connects to the included 5V/1A power
adapter
6. Power/Signal LED: When the Transmitter is
powered on:
• LED is on when HDMI signal is transmitting
• LED flashes when no HDMI signal is transmitting
7. IR In: Connects to the IR Receiver cable
8. IR Out: Connects to the IR Emitter cable
9. RS232: Connects to your control PC's RS232 port