User Manual
3
• Shut off power and make sure environment
is safe before installation
• Do not plug the HDMI cables and IR cables
in/out when the device is in use to avoid
cable damage. Make sure they are plugged
into the correct ports
• Use the included DC24V power adapter
only. Make sure the specification matches
if using 3rd-party DC power adapters
Introduction
The HDBaseT HDMI 2.0 Extender with Loopout
extends Ultra High Definition 4K HDR HDMI
signals from a source device to a display device
up to 40 meters over a single CAT5e/6 cable.
Features
• Transmits HDMI signals from source device
to display device up to 40 meters using
economical CAT5e/6 cabling
• Supports bi-directional IR remote control
function to control the source device or
display device from long distances