HDbaseT HDMI 2.
Thank you for purchasing from gofanco. Our products aim to meet all your connectivity needs wherever you go. For optimum performance and safety, please read the instructions carefully and keep this User’s Guide for future reference. If you need more information about our products, please visit www.gofanco.com. For technical support, please email us at support@gofanco.com. For drivers/manuals download, please go to www.gofanco.com/ download.
• • • Shut off power and make sure environment is safe before installation Do not plug the HDMI cables and IR Extension cables in/out when the device is in use to avoid cable damage. Make sure they are plugged into the correct ports Use the included DC12V power adapter only.
Introduction The HDbaseT HDMI 2.0 Extender with HDR extends HDMI signals up to 70 meters (230ft) with PoC using an economical CAT5e/6 cable. Features • • • • • • 4 Extends HDMI transmissions up to 70m (230ft) @ 1080p and 40m (130ft) @ 4K Supports UHD 4K/60Hz/4:4:4. HDMI 2.0 & HDCP 2.2 compliant and backward compatible with previous versions Supports HDR with 18Gbps bandwidth Supports CEC, Bi-directional IR, and RS-232 pass-through Bi-directional PoC (Power over Cable) support.
Product Layout Figure 1: Transmitter and Receiver No. Name Description 1 Mode Switcher - CTRL: RS-232 pass-through - UPDATE A: Firmware update mode - UPDATE B: Update compression IC 2 Power LED Red when power adapter is connected HDMI IN (Transmitter) Connects to your HDMI source HDMI OUT (Receiver) Connects to your HDMI display 3-Pin Terminal Block (Transmitter) RS-232 pass-through.
IR Extenders • • IR Blaster cable: Plug into the Transmitter's or Receiver's IR OUT to emit IR signals IR Receiver cable: Plug into the Receiver's or Transmitter's IR IN to receive IR signals Control your media player (such as DVD) at the TV side using the media player's remote controller • Plug the IR Receiver cable to the Receiver's IR IN port • Plug the IR Blaster cable to the Transmitter's IR OUT port Control your TV at the media player side using the TV's remote controller • Plug the IR Receiver cabl
Installation Requirements 1. 2. 3. HDMI source device (computer, DVD player, XBOX, PS3, etc). HDMI display device (SDTV/Monitor, HDTV/Monitor, projector, etc.). UTP/STP CAT5e/6 cable following IEEE-568B wiring standard. Hardware Installation 1. Power off all devices including your HDMI source and HDMI display. Transmitter 2. Connect your HDMI source device to the Transmitter's HDMI IN connector with a HDMI cable (HDMI cable not included). 3.
6. Plug your CAT5e/6 cable between the Transmitter's HDBT Out and Receiver's HDBT IN. 7. Optional: Connect the IR Extension cables according to the instructions on page 6. 8. Plug the included power adapter into either the Transmitter's or Receiver's power jack, then plug the power adapter into a reliable power source. Note: Only one power adapter is needed to power both Transmitter and Receiver. 9. Power on all connected devices. 10. The HDMI extender is ready for use.
Application Figure 2: 9
FAQ & Solutions Q: A: Q: A: 10 There is no video output or audio and video display is not normal: 1) Use a shorter network cable.
Specifications Item Description Transmission Distance 1080p: up to 70m (230ft) 4Kx2K: up to 40m (130ft) Resolution Up to 4Kx2K @ 60Hz, 4:4:4 Bandwidth 18Gbps Standards HDMI 2.0 & HDCP 2.2 Power Consumption 14W (max) Operating Temperature 0 to 40 C Storage Temperature -10 to 50 C Humidity 0% to 90% Power Supply Input: 100VAC - 240VAC, 50/60Hz Output: 12VDC / 2A Disclaimer The product name and brand name may be registered trademarks of related manufacturers.
Thank you for choosing gofanco www.gofanco.
