User Manual

3
• Shut off power and make sure environment
is safe before installation
• Do not plug the HDMI cables and IR
Extension cables in/out when the device is
in use to avoid cable damage. Make sure
they are plugged into the correct ports
• Use the included DC12V power adapter
only. Make sure the specification matches
if using 3rd-party DC power adapter
Package Contents
• Transmitter (TX) & Receiver (RX)
• IR Blaster & IR Receiver Extension Cables
• Power Adapter (1x)
• 3-Pin Phoenix Connector and Plastic
Cushions (8x)
• RS-232 Cables (2x)
• Mounting Ears and Screws (4x)
• User's Guide