User Manual

ManualsBrandsGofanco ManualsComputer Accessories & PeripheralsHDBaseT HDMI 2.0 Extender 4K 60Hz 4:4:4 HDR Over CAT5e/CAT6-70m/230ft @1080p & 40m/130ft @UHD 4K/60Hz, Dual IR, RS-232, CEC, PoC, 18Gbps Bandwidth, HDCP 2.2

1

2

3

4

5

6

7

8

9

6

IR Extenders

• IR Blaster cable: Plug into the Transmitter's

or Receiver's IR OUT to emit IR signals

• IR Receiver cable: Plug into the Receiver's

or Transmitter's IR IN to receive IR signals

Control your media player (such as DVD) at the

TV side using the media player's remote

controller

• Plug the IR Receiver cable to the Receiver's

IR IN port

• Plug the IR Blaster cable to the Transmitter's

IR OUT port

Control your TV at the media player side using

the TV's remote controller

• Plug the IR Receiver cable to the

Transmitter's IR IN port

• Plug the IR Blaster cable to the Receiver's

IR OUT port

Note: Incorrect placement of the IR cables may

result in cable failures. Please check carefully

before plugging in the IR cables. The IR Receiver

cable always plugs into an IR IN port & IR

Blaster cable always plugs into an IR OUT port.