User Guide

4
Product Layout
Figure 1: Transmitter (TX)
1 HDMI In: Connect your HDMI source here with an
HDMI cable (cable not included)
2 IR Out: Infrared 3.5mm socket. Plug IR Blaster
Extension Cable here. See instructions on page 6.
3 Reset: Press to reset if HDMI Extender doesn't work
properly
4 Power LED: On when the Transmitter is powered
5 Power Jack: Connect the included power adapter
here
6 Activity LED: Blinks during data transmission
7 Link LED: On when the Cat5e/6 cable is connected/
linked properly to Transmitter's and Receiver's RJ45
8 RJ45 Out: Link to Receiver's RJ45 In using a
Cat5e/6 cable