User Guide

Figure 2: Receiver (RX)

1 HDMI Out: Connect your HDMI display here with

an HDMI cable (cable not included)

2 IR In: Infrared 3.5mm socket. Plug IR Receiver

Extension Cable here. See instructions on page 6.

3 Reset: Press to reset if HDMI Extender doesn't work

properly

4 Power LED: On when the Receiver is powered

5 Power Jack: Connect the included power adapter

here

6 Activity LED: Blinks during data transmission

7 Link LED: On when the Cat5e/6 cable is connected/

linked properly to Transmitter's and Receiver's RJ45

8 RJ45 In: Link to the Transmitter's RJ45 Out via a

Cat5e/6 cable

Installation Requirements

1. HDMI source device (DVD player, set top box, PC,

etc.)

2. HDMI display device (SDTV/Monitor, HDTV/

Monitor, projector, etc.)

3. HDMI cables (not included)

4. UTP/STP CAT5e/6/6A/7 cable, following

IEEE-568B wiring standard