Manualshelf

User Guide

ManualsBrandsGofanco ManualsComputer Accessories & Peripherals4K HDMI Extender Over IP Ethernet Kit - 1 to Many or Over Single Cat6 Cable with Remote IR Extension Control - Up to 395 feet (120m) UHD 4K @60Hz (HDBitT4Kv2)
12345678910
6
Hardware Installation
To achieve optimal performance, Cat6 cable is
recommended.
1. Power off all devices including your HDMI source
and HDMI display.
2. Connect your HDMI source to the Transmitter's
HDMI In connector.
3. Optional: Connect the IR Blaster Extension Cable
to the Transmitter's IR Out port. Face the eye
towards your HDMI source device's IR window.
This connection is needed only if you need to
control your HDMI source from the remote
location.
4. Connect your Cat5e/6 cable between the
Transmitter's RJ45 Out and Receiver's RJ45 In.
5. Connect your HDMI display to the Receiver's
HDMI Out connector with an HDMI cable (HDMI
cable not included).
6. Optional: Connect the IR Receiver Extension Cable
to the Receiver's IR In port. This connection is
needed only if you need to control your HDMI
source device from the remote location.
7. Plug the included power adapters into the
Transmitter's and Receiver's Power Jacks, then
plug both power adapters into reliable power
outlets.
8. Power on your HDMI source device and HDMI
displays. The extender is ready for use.