User Manual

Receiver Unit
1)
Power status LED: Lights when unit is powered on
2)
Signal status LED: Lights when receiver detects that it is connected to
a transmitter unit
3)
Cat5e/6 input port: Receives the signal to be converted back into
HDMI. Connects to the transmitter unit
4)
IR TX port: Sends out IR signal to be transmitted
5)
IR RX port: Receives IR signal from remote
6)
HDMI output port: Sends the original signal from the source to an
HDMI display
7)
Power input port: This is where the receiver connects to the power
adapter
8