User Manual

HARDWARE INSTALLATION
1)
Connect an HDMI signal source, such as a game console, Blu-Ray
player or set top box (STB) to the HDMI splitter.
2)
Connect the HDMI display (such as an HD TV) into the HDMI output of
receiver.
3)
Connect one Cat5e/6 output of the HDMI splitter and one input of a
HDMI receiver by a Cat5e/6 cable.
4)
Plug the IR TX and IR RX cables into the matching IR ports of the
splitter.
5)
Plug the IR TX and IR RX cables into the matching IR ports of the
receiver.
6)
Set the EDID Dip switch appropriately, referring to the table below.
7)
At the splitter, plug one end of a 12V/2A DC power supply into an AC
socket and the other end into the power input port of the splitter. This
will power on the splitter.
8)
At the receiver, plug one end of a 5V/1A DC power supply into an AC
socket and the other end into the power input port of the splitter. This
will power on the receiver.
9)
Power on the HDMI source and display.
ATTENTION: Insert and remove cables gently. When inserting the Cat5e or
Cat6 cable, stop inserting when you hear the
“
click
”
sound. To unplug the
Cat5e or Cat6 cable, press down on the locking tab and pull the cable out.
9