User Manual

Power jack

• Power Jack: Connect the included 5V/1A DC power

adapter here

• HDMI Out: Connect your HDMI display here with an

HDMI cable (cable not included)

• IR In: Infrared 3.5mm socket. Plug IR Receiver extension

cable here. See instructions on page 7.

IR InHDMI Out

Figure 4: Receiver (RX) - HDMI Display Output

Reset

• Reset: Press to reset if HDMI Extender doesn't work

properly

• RJ45: Link to the Transmitter's RJ45 via a Cat5e/6 cable

• Link LED: Blinks when powered on. ON when the Cat5e/

6 cable is connected/linked properly between the

Transmitter and Receiver

Figure 3: Receiver (RX) - RJ45 Input

RJ45

Link LED