4-Port DP 1.4 KVM with USB 3.
Thank you for purchasing from gofanco. Our products aim to meet all your connectivity needs wherever you go. For optimum performance and safety, please read the instructions carefully and keep this User's Guide for future reference. If you need more information about our products, please visit www.gofanco.com. For technical support, email us at support@gofanco.com. For drivers or manual download, please go to www.gofanco.com/downloads.
Introduction The 4-Port DP 1.4 KVM with USB 3.0 allows you to control four 4K computers using one set of keyboard, mouse, microphone, speaker, and display. Features • • • • • • 4-Port KVM Switch with the latest DisplayPort 1.4 (Video), USB Keyboard/Mouse, with Stereo Out and Mic In. Supports either DisplayPort or HDMI output DisplayPort 1.4 and HDCP 2.2/1.4 compliant Supports up to 4K(3840x2160 & 4096x2160) @60Hz, HDR, 3D Includes a 2-port USB 3.
Product Layout Figure 1: Front Panel Layout 1. 2. 3. 4. 5. 6. 7. 8. 4 Power Button: Press to turn the KVM on and off Power LED: Lights up when KVM is powered on Input Selection: PC1 - PC4: Source device selection button Select LED (PC1-PC4): On - the corresponding PC is selected; Blinks - Auto-switching mode is enabled Online LED (PC1-PC4): On when USB port is connected to the corresponding PC IR Ext: Connects to the included IR Receiver cable.
Figure 2: Rear Panel Layout 9. 10. 11. 12. 13. 14. Output Ports: USB port: Connect to keyboard or mouse USB port: Connect to keyboard or mouse Audio jack: Connect to speakers or headphones Microphone jack: Connect to your Microphone HDMI Out: Connect to an HDMI display DisplayPort Out: Connect to a DisplayPort display Note: Only one display can be used at a time PC1 Inputs: Connects to PC1's DisplayPort output, USB 3.
Hardware Installation Front Panel Connection 1. 2. 3. Connect your microphone and speaker/ headphone to the corresponding jacks of the KVM (optional). Connect your USB device(s) to the USB ports (optional). Connect the included IR Receiver cable to the IR Ext port. This connection is optional and needed only if the embedded IR receiver window is blocked from receiving IR signals. Rear Panel Connection 1. 2. 3. 4. 5. 6. 7.
Connection Diagram The application diagram shows the most typical input and output devices used with the KVM.
Operating Instructions PC Switching There are three ways to switch between the computers, manual push button, keyboard hotkey, and IR remote control. Manual Push Button Press the front panel switch button to switch between the connected computers. Keyboard Hotkey Works with PC keyboard connected to USB-A ports on the back panel. Note: Mac keyboards do not support keyboard hotkey function due to lack of Scroll Lock key.
Remote Control Press buttons 1, 2, 3, 4 to select between the connected PCs. Press the back or forward button to switch PCs in sequence order: PC1 > PC2 > PC3 > PC4 Special Functions Mouse Place the mouse cursor on the far right of the display then move the cursor to the right for 2 seconds, the KVM switches to the next PC. Switching order: PC1 > PC2 > PC3 > PC4. USB Detection When a PC is connected the KVM's USB-B port the KVM automatically switches to it.
Specifications 10
Disclaimer The product name and brand name may be registered trademarks of related manufacturers. TM and ® may be omitted on the user's guide. The pictures on the user's guide are just for reference, and there may be some slight differences with the actual products. We reserve the right to make changes without prior notice to a product or system described herein to improve reliability, function, or design.
Thank you for choosing gofanco www.gofanco.
