User Manual

5
Product Layout
Figure 1: Transmitter (TX)
1 Reset Button Press to reset the Transmitter (TX) unit
2 RJ45 Out Connects to the Receiver's RJ45 port using a CAT cable
3 USB Port Connects to the computer's USB port
4KVM LED
Off: No PC connection
On: PC connected and detected properly
Flashing: USB device(s) detected on the RX unit
5Power LED
Flashing: Powered on, no HDMI signal detected
On: Powered on, HDMI signal detected
6 Power Jack Connects to the included power adapter
7 HDMI Out Connects to a local HDMI display
8 HDMI In Connects to PC's HDMI output