User Manual

6
Figure 2: Receiver (RX)
1 Reset Button Press to reset the Reciever (RX) unit
2 RJ45 In
Connects to the Transmitter's RJ45 port using a CAT
cable
3 USB Port (x2) Connects to your keyboard and mouse
4 KVM LED
Off: No PC connection
On: PC connected and detected properly
Flashing: USB device(s) detected on the RX unit
5 Power LED
Flashing: Powered on, no HDMI signal detected
On: Powered on, HDMI signal detected
6 Power Jack Connects to the included power adapter
7
3.5mm stereo audio
jack
Connects to headphones or speakers. Note: Switch the
audio output of the PC to PCM when using this
connection
8 HDMI Out Connects to an HDMI display