Manualshelf

User Manual

ManualsBrandsGofanco ManualsComputer Accessories & PeripheralsHDMI Splitter 4K 1X4 Port HDMI to HDMI Signal Distributor with 4 EDID Modes, Supports up to Ultra HD 4K @30Hz,3D, Compliant with HDMI and HDCP Standards, 1 in 4 Out
12345678
5
• Power plug : Power adapter plug
• Input LED : On when the input signal is detected
• HDMI input : Connect to HDMI source device
• EDID switches: Please refer to the table below to configure
EDID. There are 4 settings.
Position Setting
Mixed EDID
Copy EDID
1080p output
4Kx2K output (Default)
* Note: When changing EDID mode, it's required to unplug the
power from the source device and plug it back again.
- Mixed EDID:
Read EDID information from display with the lowest
resolution and use that resolution for all HDMl outputs.
- Copy EDID:
Splitter2P: Read EDID information from display
connected to Output 1 and use that resolution for
both HDMI outputs. If there's no display connected
to Output 1, Output 2 will display in 1080p resolution.
Splitter4P: Read EDID information from display
connected to Output 4 and use that resolution for all