User's Manual

SIZE
A
CAGE CODE
1NQ67
DOCUMENT NUMBER
D12751
REV
C
SH 7 of 25
Aircell LLC
1250 N. Arlington Heights Rd.
Suite 500
Itasca, IL 60143
AIRCELL COMPANY PROPRIETARY
A-SIZE TEMPLATE 2006-02-01
1. Powering On
The Aircell ABS Corded SIP handset automatically powers on when ABS System Power is applied. While the
handset is initializing (approximately 20 seconds), the following screen will be displayed:
Display #1 - Initializing
After initialization, the handset will attempt to register with the Aircell VoIP server. During this process, one of two
screens will be displayed depending upon whether or not the handset has been locked. (See section 3 for details
on handset locking and unlocking.)
NOTE: It is possible that the handset display may go blank after Display #1. Should this occur, the screen may be
recovered by pressing FCN, then 3, then ▼ (down arrow), then STO.
Unlocked
: The handset is attempting to connect to the Aircell VoIP server. Phone calls are not supported
while this screen is displayed, but the Setup Menu is accessible.
Display #2 - Handset is unlocked, Waiting to connect to VoIP Server
Locked
: Whenever the handset is locked, this screen is displayed. Usage of the handset is prevented until
the handset is unlocked.
Display #3 - Handset is locked
Once the Aircell ABS Corded SIP Handset has attempted to connect to the Aircell VoIP server, the handset will
enter an Idle mode. See section 2.