Owners Manual

STEP 1
Carefully place the loudspeaker upside
down or alternatively lay it horizontally on
a table to assemble the stand, covering the
supporting surface with a soft cloth to avoid
scratches and other damages to the cabinet.
To lift the loudspeaker, you can use the bass
reex port as a lifting point but pay attention
to avoid damaging the drivers.
STEP 2
Insert the spike feet into the 4 holes on the
base as shown in the picture below and
tighten them rmly to lock them in place.
STEP 3
Insert the M4x35 screws into the 4 outer
holes and rmly tighten them to join the
base.
STEP 4
Insert the M4x20 screws into the 2 central
holes and rmly tighten them to join the
base.
| ASSEMBLING THE STAND
3
STEP 5
Turn the loudspeaker upside down to
place the base on the ground ensuring the
spike feet sit on the spike pads to prevent
damages to the oor.
IMPORTANT
Please pay attention to the screws and
ensure you are using the correct type for
each step.
M4x35
M4x20
Spike feet