Owners Manual

A well designed tonearm should perform at its best with every cartridge while keeping things simple and effective, being easy
to install and use, add quality materials and elegant looks to the equation and you'll get an idea of the B-7 Ceramic.
Carefully hand made in Italy with only one purpose: make your cartridge dive deep into the vinyl and bring to life the most
natural and detailed music.
Inside the B-7 Ceramic you'll find four high precision micro ceramic ball-bearings manufactured in Germany by GRW
treated singularly and sealed to preserve their integrity and extreme precision, a crucial factor to enable noiseless
functionality to let you enjoy every single nuance in your records.
B-7 Ceramic effective length of 242mm with 19mm overhang makes it easy to install on any turntable.
The rear arm wand is damped with silicon spacer to reduce unwanted vibrations and handles a finely machined Stainless
Steel counterweight to set up most phono cartridges (up to 15 gram mass).
The vertical ultra-low friction ceramic ball-bearings are pivoted through stainless steel bolts manually adjusted, the
horizontal movement is driven by two micro ball-bearings directly inserted in the main rectified pivot.
With a 23mm diameter arm shaft, the B-7 Ceramic can be secured on every turntable, improving performances and every day
pleasure.
IMPORTANT NOTE
All our tonearms are perfectly calibrated before leaving our factory.
If further adjustments are needed, please contact Gold Note dealer as all interventions must be carried out or supervised
by qualified personnel.
DESCRIPTION AND SPECIFICATION
4