Owners Manual

Enable functions
PRE: volume control is ON
DAC: fixed output (volume
control is bypassed)
MUTE
10
EN
DE
IT
OVERVIEW OF THE DISPLAY
Thanks to the display and the SKC, all the
functions of the DS-10 can be adjusted on
the go. The volume is at the center with the
other functions found in the top and bottom
| FEATURES AND FUNCTIONS
Streaming file
format and info
Display
Turn the display ON
/ OFF / Dimmer.
When the display
is OFF, simply
operate the knob
or the remote to
turn it ON again
temporarily (timing
is 3 seconds).
Headphone
output level
There are two
power output
options available
to allow you to
perfectly match
both high-sensitivity
and low-sensitivity
headphones.
HIGH: 5W
LOW: 1W
Input selection
Network
Bluetooth
Coax
AES/EBU
TOS 1
TOS 2
USB DAC
Line In*
*DS-10 PLUS only
Volume
0 to 100
Chameleon mode
The presets are used to store the parameters of
the Chameleon mode. Select SETUP to open the
Chameleon menu and fine-tune the DS-10. There
are 3 preset slots available that you can customise
and quickly select. See the page dedicated to the
Chameleon mode for more info.
part of the display. Please refer to the image
below for details about the options available
for each function.
Output selection
Headphones
Line Out