Owners Manual

PH-10 is not working

Buzzing noise coming from

the loudspeakers.

| The interconnect cables

used on the input/output

are not shielded.

| The power cord is not

plugged in.

| The cables are not

connected to the

tonearm.

| The IEC fuse is blown

| Always use shielded

cables.

| Connect the power cord

properly and ensure the

power outlet is working.

| Ensure that the cables are

properly connected.

| Replace it with one of the

same value.

| Check the cartridge and

the tonearm.

| The tonearm and the

cartridge are not installed

properly.

PROBLEM CAUSE SOLUTION

CLEANING THE UNIT

With EXTREME care use ONLY water or detergents for delicate surfaces with a very soft

cloth to sweep dust and remove stains.

Any acid or not extremely soft cloth will irreversibly damage the unit. Do not use alcohol.