Owners Manual

6
GND SIGNAL GROUND
Every system operates in unique conditions
due to the electrical interaction between
different products and the electrical wiring
and the GND connector on the PSU-10/
PSU-10 EVO allows you to try different
congurations.
If the are signs of EMI (Electro Magnetic
Interference) or RFI (Radio-Frequency
Interference), please try to connect the GND
posts of the PH-10/DS-10 and the PSU.
MASTER-SLAVE MODE
All our PSUs are designed to work in
“Master-Slave Mode” with other Gold Note
units.
When you turn ON or put in standby the
master unit (such as DS-10 or PH-10) the
PSU-10 or PSU-10 EVO will do the same so
that you don’t have to control every unit
manually.
To turn completely OFF the PSU-10 or PSU-
10 EVO, follow these steps:
1 Turn OFF the MASTER SWITCH of the
master unit (such as DS-10 or PH-10).
2 Turn OFF the MASTER SWITCH of PSU-
10 or PSU-10 EVO.
ATTENTION
When the master switch of PSU-10 and
PSU- 10 EVO is ON/Standby, the status LED
is Blue.
EN
DE
IT
FR