Owners Manual

ManualsBrandsGold Note ManualsAudio3-way Floorstanding Speaker

DESCRIPTION AND SPECIFICATIONS

XS DESIGN

The unique design of our flagship speaker is based on

ultra-rigid, curved and modular panels. These panels are

exclusively hand-crafted in Italy by the most skilled

cabinet-maker.

The high-damped cabinet is reinforced with a doubled

internal structure and with external wooden multilayer

panels to control resonances and improve the audio

performance. The cabinets conveniently separate the

basses and the mid/highs for a perfect tuning and are

coupled with a 3mm aluminium board to increase the

rigidity of the entire structure even further.

The woofers are installed in a vented cabinet while the

mid/highs are housed in sealed chambers in the upper

cabinet. The upper cabinet also features a second open

chamber with a massive grille made of solid aluminium

to maximize rigidity and reduce internal reflections at

the same time.

The loudspeaker features an integrated heavy-duty

stand made of steel and wood.

TWEETER

For this loudspeaker we developed a 28 mm ultra-

linear tweeter with an extra-thin and soft silk dome

aluminium damping elliptical rear chamber.

This tweeter provides low frequency resonance,

minimal harmonic distortion and an exceptional

musicality making it a real high-quality and High-

End acoustic transducer.

MIDRANGES

The upper cabinet houses two 150mm ultra-linear

drivers that feature high mass phase plugs and

Nextel treated paper cones to reach high rigidity

and fast natural audio response.

Adaptive rubber surrounds provide an ideal match

to the cone over the total frequency range.

The extra large magnet system with long and

lightweight CCAW voice coil allows perfect coil

excursion and low distortion due to excellent

transient response.

Solid copper rings are mounted above and below

the T-shaped pole piece to reduce non-linear and

modulation distortions and to increase the overload

margin.

The driver is completed by an extremely stiff and

stable skeleton in aluminium/magnesium to avoid

airflow noises and to increase rigidity and

lightness.