Owner's Manual

3. Orient the Bottom Crossbar (10) so that the warn-

ing decal is on top. Attach the Bottom Crossbar to

one of the Upright Bases (2) with two M8 x 77mm

Bolts (28), a Support Plate (13), and two M8

Locknuts (22). Do not tighten the Locknuts yet.

Attach the Bottom Crossbar (10) to the other

Upright Base (2) in the same way.

exagonal

holes on

this side

2. Attach an Upright Base (2) to one of the

Stabilizers (1) with the indicated two M8 x 68mm

Carriage Bolts (20) and two M8 Locknuts (22).

ote: Attach the Upright Base so that the

hexagonal holes are on the indicated side. Do

ot tighten the Locknuts yet.

Attach the other Upright Base (not shown) to

the other Stabilizer (not shown) in the same

way.

Decal