Owner's Manual

7
2. Attach the Front Leg (4) to the Frame (1) with
two M8 x 63mm Bolts (38), two M8 Curved
Washers (33), and two M8 Locknuts (31). Do
n
ot tighten the Locknuts yet.
4. Orient the Seat (18) as shown.
Attach the Seat (18) to the Frame (1) with four
M6 x 25mm Screws (39).
2
4
1
3
1
31
3
3
3
8
3
3. Orient the Rear Stabilizer (3) so that the warn-
ing decals are facing upward.
Attach the Rear Stabilizer (3) to the Frame (1)
with two M10 x 43mm Carriage Bolts (40) and
two M10 Locknuts (37).
See step 1. Tighten the M10 Locknuts (37)
and the M8 x 48mm Screw (47).
See step 2. Tighten the M8 Locknuts (31).
4
1
18
39
1
3
Warning
Decals
37
40