Warranty

7
ASSEMBLY
2. Orient the Front Stabilizer (2) so that the square
holes are toward the floor. Attach the Front
Stabilizer to the Front Leg (4) with two M10 x
90mm Carriage Bolts (40) and two M10 Locknuts
(12). Do not tighten the Locknuts yet.
2
12
12
4
2
40
Square
Holes
• To hire an authorized service technician to
assemble the weight system, call 1-800-445-2480.
• Assembly requires two persons.
• Because of its weight and size, assemble the
weight bench in the location where it will be used.
Make sure that there is enough clearance to walk
around the weight bench.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is fi nished.
• For help identifying small parts, see page 6.
• In addition to the included tool(s), assembly
requires the following tool(s):
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly may be easier if you have your own set
of wrenches. To avoid damaging parts, do not use
power tools.
1. Go to www.workoutwarehouse.com/
registration on your computer and register
your product.
• activates your warranty
• saves you time if you ever need to contact
Customer Care
• allows us to notify you of upgrades and offers
Note: If you do not have Internet access, call
Customer Care (see the front cover of this
manual) and register your product.
1