Warranty

8
3. Attach the Rear Stabilizer (3) to the Frame (1)
with two M10 x 90mm Carriage Bolts (40) and
two M10 Locknuts (12). Do not tighten the
Locknuts yet.
4. Attach the Seat (18) and the Seat Bracket (10) to
the Frame (1) with two M6 x 80mm Screws (46)
and two M6 Washers (38).
3
1
12
Warning
Decal
3
40
12
4
5. Attach the Frame (1) to the Front Leg (4) with
two M10 x 85mm Bolts (43), two M10 Washers
(39), and an M10 Locknut (12). Do not tighten
the Locknut yet.
Finish attaching the Front Leg (4) to the Frame
(1) with four M4 x 19mm Screws (42); start all
the Screws, and then tighten them.
Tighten the M10 Locknuts (12) used in steps
2, 3, and 5.
5
1
1
4
42
12
43
39
18
Wide End
10
46
38
38