Instructions / Assembly

ADJUSTING THE BACKREST

To adjust the angle of the Backrest (19), raise the

Backrest and insert the lower end of the Backrest

Brace (10) into one of the adjustment slots in the

Frame (1).

ADJUSTING THE SEAT

To adjust the angle of the Seat (18), remove the

Seat Pin (13), raise or lower the Seat, and then

insert the Seat Pin into the Frame (1) and into one of

the adjustment slots in the Seat Frame (not shown).

ADJUSTMENT

The steps below explain how to adjust the weight bench. Make sure that all parts are properly tightened each time

the weight bench is used. Replace any worn parts immediately. The weight bench can be cleaned with a damp

cloth and a mild, non-abrasive detergent; do not use solvents to clean the weight bench.

Slot