Instructions / Assembly

M10 Locknut

(11)–2

M10 x 45mm Screw (7)–4

M10 x 202mm Bolt (3)–2

M10 Washer

(4)–4

M4 x 19mm

Screw (9)–1

M6 Washer

(12)–4

M6 x 40mm

Screw (14)–4

M6 x 16mm

Screw (21)–4

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each

drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the

key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it

has been preassembled. Extra parts may be included.