Instructions / Assembly

8
4. Using a plastic bag to keep your fingers clean,
apply a small amount of the included grease to
an M10 x 202mm Bolt (3).
Orient the two Backrest Frames (5) and the
Backrest Brace (10) so that the holes (A) are in
the indicated locations.
Attach the Backrest Frames (5) to the Backrest
Brace (10) with the M10 x 202mm Bolt (3), two
M10 Washers (4), and an M10 Locknut (11); do
not fully tighten the Locknut yet.
4
5
3
10
A
Grease
11
4
4
3. Attach the Long Stabilizer (2) to the Frame (1)
with two M10 x 45mm Screws (7); start both
Screws, and then tighten them.
See step 2. Tighten the two M10 x 45mm
Screws (7).
3
2
1
7