Instructions / Assembly

10
8. Orient the Seat Carriage (7) as shown. Slide the
Seat Carriage onto the Seat Frame (1).
Attach the Front Leg (3) to the Seat Frame
(1) with four M8 x 55mm Bolts (46), two M8
Washers (43), and four M8 Locknuts (37). Do
not tighten the Locknuts yet.
See the inset drawing. Attach the Adjustment
Pin (25) to the Seat Carriage (7) with an M4
x 16mm Self-tapping Screw (26). Then, insert
the Adjustment Pin through the Seat Carriage
into an adjustment hole in the Seat Frame (1).
Make sure that the Adjustment Pin is firmly
engaged in an adjustment hole.
8
3
46
46
1
7
37
37
43
7. Orient the Seat Frame (1) so that the hexagonal
holes are facing the floor.
Attach the Seat Frame (1) to the Crossbar (2)
with two M10 x 60mm Bolts (9) and two M10
Locknuts (40). Do not tighten the Locknuts
yet.
7
2
40
9
Hexagonal
Holes
1
25
1
7
26