Instructions / Assembly

11
10. Attach the two Backrest Frames (16) to the
Backrest (18) with four M6 x 40mm Screws (48)
and four M6 Washers (42). Do not tighten the
Screws yet.
10
48
18
16
42
42
9. Set the Backrest Support (14) in the brackets on
the Uprights (8). Make sure that the pins on
the Backrest Support are inserted into the
holes in the brackets.
See steps 2–7. Tighten the M10 Locknuts (40).
See step 8. Tighten the M8 Locknuts (37).
9
14
Pin
Bracket
8
8
48