Instructions / Assembly

12
12. Attach the Seat (19) to the Seat Carriage (7)
with four M6 x 16mm Screws (49); start all the
Screws, and then tighten them.
12
19
49
7
13. Apply grease to an M10 x 70mm Bolt (29).
Attach the Leg Lever (12) to the Front Leg (3)
with the M10 x 70mm Bolt (29) and an M10
Locknut (40). Do not overtighten the Locknut;
the Leg Lever must pivot easily.
13
3
40
29
12
11. Apply grease to an M10 x 143mm Bolt (50).
Attach the Backrest Frames (16) to the Seat
Carriage (7) with the M10 x 143mm Bolt (50),
two M10 Washers (41), and an M10 Locknut
(40). Do not overtighten the Locknut; the
Backrest Frames must pivot easily.
See step 10. Tighten the four M6 x 40mm
Screws (48).
11
50
Grease
41
40
7
41
16
Grease