Instructions / Assembly

13
14. Attach the Weight Tube (22) to the Leg Lever
(12) with an M8 x 55mm Bolt (46), two M8
Washers (43), a Weight Tube Bushing (47), and
an M8 Locknut (37).
Press the 25mm Round Outer Cap (34) onto the
Weight Tube (22).
15. Insert a Pad Tube (21) into either of the two
holes in the Front Leg (3).
Slide a Foam Pad (24) onto each end of the Pad
Tube (21).
15
3
21
24
24
16. Insert the remaining two Pad Tubes (21) into the
Leg Lever (12).
Slide two Foam Pads (24) onto each Pad Tube
(21).
16
12
21
21
24
24
14
43
37
43
12
46
22
34
47