Instructions / Assembly

Weight

USING THE LEG LEVER

To use the Leg Lever (12), slide the desired weights

(not included) onto the Weight Tube (22). Secure the

weights with a Weight Clip (23).

The indicated Foam Pads (24) and Pad Tube (not

shown) can be attached in either of the two holes

near the top of the Front Leg (3). Choose the posi-

tion that is the most comfortable for you.

WARNING: Do not place more

than 150 lbs. (68 kg) on the Weight Tube (22).

Secure the weights with a Weight Clip (23).

ADJUSTING THE WEIGHT RESTS

To use a barbell (not included) with the weight

bench, insert the two Weight Rests (33) into the

Uprights (8) at the appropriate height. Rotate the

locking clips around the Uprights.

WARNING: Always place both

Weight Rests (33) at the same height. Make

sure that the locking clips are securely

wrapped around the Uprights (8).

THE OPTIONAL CURL PAD

The optional curl pad enables you to perform

additional exercises with your weight bench. To pur-

chase the optional curl pad, see the front cover

of this manual.

Locking Clip