User Manual

Cool Mode
To initiate the cooling function press the cool
button. This function blows normal air through
a water curtain to cool the air. Press the
button again to switch this function off and the
appliance will operate in fan only mode.
Note: It will take a few minutes for the cooler
air to come out of the appliance.
Note: You must have water in the water tank
for this function to work.
Swing
The horizontal louver can be shifted manually
for the air outlet to blow up or down to suit.
The vertical louvres can be set to your desired
direction or allowed to oscillate by pressing
the swing button.
Sleep Mode
Programmed to provide comfort while the
user is asleep.
This mode operates with speed on LOW.
Operating your Fan
Remote control
The remote requires a line-of-sight path to
allow for the signal to be received by the
appliance. Position the appliance so the
receiver lens is visible from the remote
control.
The symbols on the remote correspond to the
symbols on the main appliance.
Remove battery cover and install two “AAA”
batteries (not included).
CAUTION do not leave the appliance operating
unattended.
WARNING do not cover this appliance.