User Manual

Fan control switch
The control switch positions are:
• 0 = Off
• 1 = Low speed
• 2 = Medium Speed
• 3 = High Speed
Place the fan on a dry, level and sturdy
surface.
Plug the power cord into the socket,
making sure the speed control is in the off
position.
To operate the fan, slide the control switch
into position 1, 2 or 3, until desired wind
speed is achieved.
Adjust tilt by loosening the head tilt knob
and tilting to the desired wind direction (i.e.
Either upward or downward). Re-tighten
the knob to fix the position.
To activate the oscillation function, push
down the oscillation button on the back of
the motor. The fan will then oscillate until
the button is pushed again.
Always choose a safe location for the fan, keeping in mind the safety precautions
outlined. This fan is already fully assembled for your convenience. Ensure all
packaging has been removed from the unit before use. This appliance requires no
installation, it should be used solely as a portable appliance.
Operating your Fan
WARNING Keep all objects at least 1 metre from the front, sides and rear of the
appliance
WARNING: This fan is fitted with soft blades which are safe, even if you
touch them when the product is working, however, it is recommended
to turn the product off before moving, adjusting or cleaning.
IMPORTANT! NEVER COVER THIS
APPLIANCE!
DO NOT HANG THE FAN! FOR TABLE
USE ONLY!